As of press time, I received no answers to last week’s trivia question. So, when was the Look Nevada toepiece created?
It surprised me to find out that it was 1950. The Look Nevada, designed by Jean Beyl in Nevers, France, was way ahead of its time.
To give some perspective, the first release binding of any kind was the Saf-Ski invented by Hjalmar Hvam in 1939. Hvam had been motivated to design the binding after suffering a broken leg in the same race two years in a row.
Only 11 years later, Beyl introduced a binding with adjustable release tension and anti-shock capability. Today’s toepieces are only an incremental improvement over that first Look Nevada.
For many years, cable bindings were the way to affix your heel to a ski. They even developed cable bindings with forward release capability. However, demand for more control over a ski, particularly by racers in hard-packed conditions, led to the development of the separate fixed heelpiece. These firmly attached your heel to the ski and the only forward release was when the screws pulled out. (And, yes, that did happen.)
Fixed heelpieces became turntables as release toepieces became more prevalent.
One of the most memorable components associated with turntable bindings was the long thong. The long thong was a leather ski-retention strap, a safety strap; when the toe binding released, it kept you affixed to the heel unit and the ski. This could have been accomplished with a strap probably 18 inches long or even less, but why settle for 18 inches when 48 inches was available? There was another reason for this, since extra wraps of leather around the upper portion of a leather ski boot improved the forward support that skiers desire. However there were ramifications.
Wrapping a long thong: Take the long end (which should be on the inside edge of your ski) and wrap it around the boot front-to-back; then pass it through the ring on the opposite side of the binding; wrap the remaining strap back around the boot front-to-back; then pass it through the ring on the original inner side of the binding. How much strap do you have left? If it’s less than a foot, fasten it with the corresponding buckle on the outside of the binding. If it’s a foot or more, wrap it around the upper boot until there is less than a foot. That took care of one ski!
Also, it is probably worth noting that this had to be done bare-handed even on the coldest days.
Over time, everyone developed their own unique wrapping approach, which became a routine. If you wanted to screw up other skiers, just cut 8 inches off one of their long thongs.
The first wrap of the day was the easiest, since the leather straps were usually dry and pliable, but during a day of skiing, the straps would become iced in spots, so subsequent wraps were more difficult and colder on the hands.
Gondolas were the curse of the long thong user, since you had to wrap and unwrap for every run. More than once, I opted to take a T-bar run rather than another gondola run, just to avoid the wrapping process.
Another special situation was spring skiing. The warm temperatures and melting snow meant that the long thong straps became saturated with water. And what happens to leather when it gets wet? That’s right, it stretches. So now there were 2 more feet of long thong to wrap.
The next time you click into your step-in bindings with ski brakes, just remember all the fun you’re missing.
Speaking of step-ins, that’s our next trivia question: You’re riding a chairlift over an intermediate trail in the mid-1960s and you hear a metallic “thwangzzzzzzzz.”
What brand of binding just released?
Submit your answers at www.retro-skiing.com.
Greg Morrill is a retired computer programmer and college professor who’s looking forward to his first 100-day season. Comment on this article on stowereporter.com, or e-mail letters to email@example.com.